|
Acid and Caustic Service
- A synthetic lubricant for glycols, strong acids and strong alkalis,
refinery and petrochemical plant use.
- Chemofluor is recommended for hard to hold applications such as
glycols, solvents, strong acids and strong alkalis. It is also
recommended for aromatic service.
- Chemofluor white is available for applications where discoloration
in a product stream may create a problem.
|
|
Hydrocarbon Service (Contains PTFE)
- A synthetic lubricant/sealant formulated for general hydrocarbon
service.
- Contains fine grain PTFE particles suspended in a hydrocarbon
resistant base.
- Suitable for use on threads, gaskets, stuffing boxes and valve
stems.
- Pumpable with a high pressure (10,000p.s.i.) grease gun.
|
|
Synthetic Sealant for Hard to Seal Valves
- The ultimate sealant for internally worn or damaged valves.
- Contains a 100% synthetic base fluid for excellent resistance to
washout from hydrocarbons.
- Contains chemically inert PTFE for ultimate sealing
capabilities.
- Can also be used as a sealant for stuffing boxes or as injectable
packing.
|
|
Hydrogen
Sulfide Service
-
A synthetic lubricant for valves, swivel joints, pumps and flanges in
service on sour gases and crudes.
- Used world wide in applications where hydrogen sulfide and carbon
dioxide are present.
- Desco 111 has high metal adhesion, corrosion resistance and is
waterproof.
|
Hydrogen
Sulfide Service / Arctic Grade
- Chemola 111-LT is designed for use in valves under arctic conditions
to -57°C (-75°F). 111-LT is extremely resistant to hydrogen sulfide and will
not mix with water, preventing freeze-up in the valve. Imparts good
metal protection, provides lubrication and is waterproof.
|
Catalytic
Alkylation's Service
- A synthetic lubricant for hydrocarbon service.
- Formulated with polymeric lubricant bases to enhance high and low
temperature performance, and hydrocarbon resistance along with
resistance to strong acids and bases.
|
DESCO™ Polymel
422™
Hydrocarbon Service / High Temperature
- A synthetic lubricant for hydrocarbon and high temperature service.
- Polymel 422 has the enhanced performance of Polymel 410 but with molybdenum disulfide and graphite added as solid lubricants.
- Polymel 422 converts to a solid film lubricant at temperatures above +232°C (+450°F).
|
DESCO™ Polymel 433™Hydrocarbon Service
/ Expanded Low Temperature
- New from Chemola! Enhanced hydrocarbon resistance
with superior high temperature performance.
- Expanded low temperature range.
- Maintains a heavy bodied grease consistently after extended
exposure to high temperatures.
|
|
Hydrocarbon Service
- A superior lubricant formulated for resistance to hydrocarbons
- Our most popular lubricant for non-sour services. Contains 100%
synthetic oils with a non-soap thickener.
|
Gate Valve
Lubricant for WKM* Type Valves
- "Peanut butter" synthetic
lubricant/sealant for use in gate valves with liquid and gaseous
hydrocarbon service. 100% synthetic.
|
Gate Valve
Lubricant for WKM* Type Valves / Arctic Grade
- New from Chemola! A 100% synthetic, arctic grade "peanut
butter" lubricant for use in gate valves in liquid
and gaseous hydrocarbon service.
- Pumpable at sub-zero temperatures.
|
|
Hydrocarbon Service / Low Temperature
- Desco 622 greatly expands the effective temperature range of
synthetic valve lubricants while providing improved fuel and oil
resistance.
- Formulated with 100% synthetic base oils reinforced with a
state-of-the art additive package to provide superior sealing and
lubricating properties.
|
|
Hydrocarbon Service / For McEvoy* Type Valves
- A superior gate valve lubricant formulated with 100% synthetic
oils and non-soap thickeners. Very effective in gas service (except
chlorine, bromine, fluorine, and oxygen.
- Has excellent metal adhesion, corrosion resistance, EP
characteristics and is water proof.
|
|
High Temperature Service
- Formulated with 100% synthetic oils for hydrocarbon resistance
and high temperatures.
- Desco 750 contains solid lubricants for effective lubrication at
temperatures to +482°C (+900°F).
- Service recommendations below +232°C (+450°F) are similar to Desco 600.
|
|
Aromatic Hydrocarbon Service
- A synthetic lubricant formulated for enhanced resistance to
aromatic hydrocarbons and unleaded gasoline.
- A blend of heavy bodied synthetic oils that have superior metal
adhesion and resistance to hydrocarbon blends that have a high
percentage of aromatic compounds.
- Desco 800 is water resistant and has excellent oxidation
resistance.
DESCO™ 850
Specialized Lubricant for Aromatic Hydrocarbon Service
-
A synthetic lubricant for valves, swivel joints, pumps and flanges in
aromatic hydrocarbon service.
- Desco 850 is a grainy, full-bodied lubricant/sealant. tacky to
the touch and soluble in water.
|
|
Premium Synthetic
- An all-purpose hydrocarbon-resistant synthetic
lubricant containing molybdenum disulfide.
- Desco 955 is formulated with a solid lubricant (molybdenum
disulfide) to provide lubrication to +316°C (+600°F).
- Desco 955 is a standard lubricant used in gas pipelines.
|
Body Fill for Gate Valves with Cavities
- Formulated for gate valves that contain body cavities.
- Desco 960 is an economical body fill that will displace water and
other contaminants.
- Desco 960 has high metal adhesion to lubricate and seal gates as
they enter the body cavity.
|
For
Corroded and Frozen Valves
- Desco Valve Cut is a formulated multi-ingredient, semi-fluid
combination of penetrants and lubricants designed to dissolve and
cut residual gums, lacquer deposits, inert solids and corrosion
deposits that make valves hard or impossible to operate.
- By using Desco Valve Cut a valve may be made operational without
cutting the product or disassembling the valve.
- Valve Cut is not a permanent lubricant or sealant, but is
compatible with most lubricants.
- Valve Cut is not flammable and contains graphite for added
lubricity.
|
